Tony Posted April 21, 2008 Author Report Share Posted April 21, 2008 The Haweka wheel balance plates arrived today Basically these allow us to mount the wheel in the same fashion as they are mounted on the car... As some may know i have campaigned for years to inform the public the wheels centre hole is cosmetically central so a real reason for balance complaints..... Can't wait (much longer) :bigeyed: Do you want to suggest a date now... As you know the shutters go in on the 28/9th and the exterior should be dealt with at the same time, so we are looking 30th? on. Quote Link to comment Share on other sites More sharing options...
Tony Posted April 21, 2008 Author Report Share Posted April 21, 2008 Your spoilt :bigeyed: To "do it right, do it once" means this type of addition to the equipment is vital despite the cost..... I'm still waiting for the lasor "lateral recognition reader" to arrive. This tells us where to match the wheel/tyre lateral disparities... Basically an optimizer. Other news, Hoffman who make the equipment have asked if they can use the wim centre as part of their static/dynamic sales drive .... I think the clean environment and their top notch range on site is quite an advert for them and in truth i have no objections. Quote Link to comment Share on other sites More sharing options...
Tango Posted April 21, 2008 Report Share Posted April 21, 2008 Do you want to suggest a date now... As you know the shutters go in on the 28/9th and the exterior should be dealt with at the same time, so we are looking 30th? on. Lets make it the 30th then.... Quote Link to comment Share on other sites More sharing options...
hms Posted April 21, 2008 Report Share Posted April 21, 2008 'Ere Tony, Not a grey market Hunter imported from Europe is it? Set to drive on the wrong side of the road! :bigeyed: :D h Quote Link to comment Share on other sites More sharing options...
Tony Posted April 22, 2008 Author Report Share Posted April 22, 2008 Do you want to suggest a date now... As you know the shutters go in on the 28/9th and the exterior should be dealt with at the same time, so we are looking 30th? on. Lets make it the 30th then.... Oooops my mistake, i've got two days training 30th/ 1st so can we go from the 2nd :bigeyed: Quote Link to comment Share on other sites More sharing options...
Tony Posted April 22, 2008 Author Report Share Posted April 22, 2008 Hoffman who supplied us with the BOSS and other equipment are so impressed with the centre they have asked if they could take a video to put online Seemingly they want to use the centre for a sales link demonstration at the wheels-inmotion centre This includes flyer's and other pro-mo stuff. Quote Link to comment Share on other sites More sharing options...
scorps Posted April 22, 2008 Report Share Posted April 22, 2008 Dont forget to wear your new overalls....er sorry workshop suits Quote Link to comment Share on other sites More sharing options...
Tony Posted April 22, 2008 Author Report Share Posted April 22, 2008 Dont forget to wear your new overalls....er sorry workshop suits I will never, ever, ever, ever wear overalls again, they look horrible and every time you raise your arms above your head you end up seriously separating the twins, if you know what i mean Quote Link to comment Share on other sites More sharing options...
Janey Posted April 23, 2008 Report Share Posted April 23, 2008 Dont forget to wear your new overalls....er sorry workshop suits I will never, ever, ever, ever wear overalls again, they look horrible and every time you raise your arms above your head you end up seriously separating the twins, if you know what i mean I think you & Mark should have pale blue shirts with little logos on like the guy in the video ....and of course keep them nice & clean all day like he does Quote Link to comment Share on other sites More sharing options...
scorps Posted April 23, 2008 Report Share Posted April 23, 2008 WIM coloured polo shirts with your names on the collar Can you wear latex gloves next time you work on mine.....please Quote Link to comment Share on other sites More sharing options...
Tony Posted April 23, 2008 Author Report Share Posted April 23, 2008 WIM coloured polo shirts with your names on the collar Can you wear latex gloves next time you work on mine.....please I have ordered the uniforms but it was so long ago i've forgotten what the look like Quote Link to comment Share on other sites More sharing options...
Tony Posted April 27, 2008 Author Report Share Posted April 27, 2008 Even a seven year old can drive the BOSS Special thanks to young Josh...... Dave@ Prolex was looking a little worried since this was his new rims Josh was fitting the tyre to Quote Link to comment Share on other sites More sharing options...
djwozza Posted April 27, 2008 Report Share Posted April 27, 2008 I bet Dave's face was a picture Quote Link to comment Share on other sites More sharing options...
scorps Posted April 27, 2008 Report Share Posted April 27, 2008 Its an impressive bit of kit that machine....top draw!! Quote Link to comment Share on other sites More sharing options...
Mat Posted April 27, 2008 Report Share Posted April 27, 2008 the place is phenomenal, and so is Tony, i have to thank him for waiting for me friday to come up and look over the truck after fitting new steering rod ends..... the unit is gonna be a Gem , once finished off and upto full working steam.... well done and thank you Tony (Brilliant coffee) Quote Link to comment Share on other sites More sharing options...
Tony Posted April 27, 2008 Author Report Share Posted April 27, 2008 the place is phenomenal, and so is Tony, i have to thank him for waiting for me friday to come up and look over the truck after fitting new steering rod ends..... the unit is gonna be a Gem , once finished off and upto full working steam.... well done and thank you Tony (Brilliant coffee) Thanks..... My "coffee" manipulation seems to be gathering speed Quote Link to comment Share on other sites More sharing options...
Ellz Posted April 27, 2008 Report Share Posted April 27, 2008 Look amazing Tony cant wait for you to work your magic on the race cars Quote Link to comment Share on other sites More sharing options...
Bazza Posted April 27, 2008 Report Share Posted April 27, 2008 Even a seven year old can drive the BOSS Special thanks to young Josh...... Dave@ Prolex was looking a little worried since this was his new rims Josh was fitting the tyre to the BOSS is now funtional when is the video coming Quote Link to comment Share on other sites More sharing options...
scorps Posted April 27, 2008 Report Share Posted April 27, 2008 Thanks..... My "coffee" manipulation seems to be gathering speed Yep your nearly there Quote Link to comment Share on other sites More sharing options...
Tony Posted April 27, 2008 Author Report Share Posted April 27, 2008 Even a seven year old can drive the BOSS Special thanks to young Josh...... Dave@ Prolex was looking a little worried since this was his new rims Josh was fitting the tyre to the BOSS is now funtional when is the video coming Beachshore who police the wim forum will be on the case once the centre is open, they have some very exciting plans for wim web/forum. Quote Link to comment Share on other sites More sharing options...
dazz33 Posted April 27, 2008 Report Share Posted April 27, 2008 Glad the BOSS machine is up and running was very impressed when i last saw it and also the wheel balancing machine looks the buisness. Oh got the decals on the car.. Quote Link to comment Share on other sites More sharing options...
Prolex-UK Posted April 27, 2008 Report Share Posted April 27, 2008 will be there on 25/5 Tony.................coming in force..............kamelia my mum and jessica the JRT......... Quote Link to comment Share on other sites More sharing options...
Tony Posted April 27, 2008 Author Report Share Posted April 27, 2008 Glad the BOSS machine is up and running was very impressed when i last saw it and also the wheel balancing machine looks the buisness. Oh got the decals on the car.. Sweet.... Thanks for that Darren Quote Link to comment Share on other sites More sharing options...
Tony Posted April 27, 2008 Author Report Share Posted April 27, 2008 will be there on 25/5 Tony.................coming in force..............kamelia my mum and jessica the JRT......... Superb... Trust me they will have a memorable day (the wim way) Quote Link to comment Share on other sites More sharing options...
dazz33 Posted April 27, 2008 Report Share Posted April 27, 2008 Glad the BOSS machine is up and running was very impressed when i last saw it and also the wheel balancing machine looks the buisness. Oh got the decals on the car.. Sweet.... Thanks for that Darren No probs Tony anything to get you some public attention...do you have any of the small ones with the blue WIM writing on them? like the ones on monster mats lex.? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.