Tony Posted July 19, 2012 Report Share Posted July 19, 2012 NSR might be a problem though Quote Link to comment Share on other sites More sharing options...
GamithUK Posted July 23, 2012 Report Share Posted July 23, 2012 Nah - just get a broom and do the far side rather than nearside of the wheel. The real problem would be getting between the 'spokes' - I would recommend stopping and doing it properly. ttfn Quote Link to comment Share on other sites More sharing options...
Tony Posted July 24, 2012 Author Report Share Posted July 24, 2012 The rears are a deep dish/ no spokes. Quote Link to comment Share on other sites More sharing options...
liner33 Posted July 24, 2012 Report Share Posted July 24, 2012 Wow they are going to take some elbow grease to keep clean!! Quote Link to comment Share on other sites More sharing options...
Rich Posted July 24, 2012 Report Share Posted July 24, 2012 Need a big tub of metal polish for those! Quote Link to comment Share on other sites More sharing options...
Tony Posted July 24, 2012 Author Report Share Posted July 24, 2012 I'll just run them through the wheel refurbishment machine once a month Quote Link to comment Share on other sites More sharing options...
Rich Posted July 24, 2012 Report Share Posted July 24, 2012 Good idea Quote Link to comment Share on other sites More sharing options...
Tony Posted July 24, 2012 Author Report Share Posted July 24, 2012 Might get them coded red, not to sure? Quote Link to comment Share on other sites More sharing options...
parthiban Posted July 24, 2012 Report Share Posted July 24, 2012 I'll just run them through the wheel refurbishment machine once a month When you say wheel refurbishment machine, is that a completely automated process that refurbs wheels? Might get them coded red, not to sure? Noooo don't do it! Quote Link to comment Share on other sites More sharing options...
Tony Posted July 24, 2012 Author Report Share Posted July 24, 2012 Yep, it's a cool million pound, first of it's type in the world automatic machine..... And no i was only kidding about the coding. Quote Link to comment Share on other sites More sharing options...
parthiban Posted July 24, 2012 Report Share Posted July 24, 2012 Yep, it's a cool million pound, first of it's type in the world automatic machine..... And no i was only kidding about the coding. Wow that sounds amazing? Sorry if I've missed this in an earlier thread or something, but is there a video or similar? How does it work exactly, can it do all finishes, including the polished finishes like your lambo wheels for example? Quote Link to comment Share on other sites More sharing options...
Tony Posted July 24, 2012 Author Report Share Posted July 24, 2012 I can't show any images or video because we don't want to show how it's being done. The machine has a 15 stage preparation the it will lathe, diamond cut, weld or reshape, it can powder or paint and then bake. We can repair anything, even replace a broken spoke or even make you a wheel from a billet. Quote Link to comment Share on other sites More sharing options...
parthiban Posted July 24, 2012 Report Share Posted July 24, 2012 I can't show any images or video because we don't want to show how it's being done. The machine has a 15 stage preparation the it will lathe, diamond cut, weld or reshape, it can powder or paint and then bake. We can repair anything, even replace a broken spoke or even make you a wheel from a billet. That sounds truly amazing, honestly if it wasn't coming from you I wouldn't be sure such a machine could exist! What are the results like, do you have any example photos? Quote Link to comment Share on other sites More sharing options...
Tony Posted July 24, 2012 Author Report Share Posted July 24, 2012 It's still about a month from completion because the kit is coming from all over the world. We have two container loads of wheels to practice on and fine tune the machine, there will be plenty of pictures then. Quote Link to comment Share on other sites More sharing options...
parthiban Posted July 24, 2012 Report Share Posted July 24, 2012 It's still about a month from completion because the kit is coming from all over the world. We have two container loads of wheels to practice on and fine tune the machine, there will be plenty of pictures then. Ahh, look forward to the pics when it's all up and running. Quote Link to comment Share on other sites More sharing options...
andyelcomb Posted July 24, 2012 Report Share Posted July 24, 2012 It's still about a month from completion because the kit is coming from all over the world. We have two container loads of wheels to practice on and fine tune the machine, there will be plenty of pictures then. Just hope we don't see them all in the Horrors of the Week! Quote Link to comment Share on other sites More sharing options...
Tony Posted July 24, 2012 Author Report Share Posted July 24, 2012 And me Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.