SMARTLY Posted November 23, 2010 Report Share Posted November 23, 2010 So what needs checking? From my earlier post: 1). O/S front tyre although 5 mm on all three readings, reported inner starting to wear Checked tyre when I got home and what they have said is correct. It's an Avon ZV5 and it's one of those treads that's not the same all across the tyre. The three treads are fine but on the inside of that is a "different" cross tread pattern and that has worn in comparison to the other on the front. So I guess this is going to need a geometry check and correction at some stage? Quote Link to comment Share on other sites More sharing options...
CIH Posted November 23, 2010 Report Share Posted November 23, 2010 can you put a picture up ? doesn't sound too bad ? Quote Link to comment Share on other sites More sharing options...
Rich Posted November 24, 2010 Report Share Posted November 24, 2010 You mean you have an asymmetrical tread pattern? I'd imagine it's just the toe that is causing it. Quote Link to comment Share on other sites More sharing options...
Tony Posted November 24, 2010 Report Share Posted November 24, 2010 It's worth a geo check just to be safe. Quote Link to comment Share on other sites More sharing options...
Rich Posted November 24, 2010 Report Share Posted November 24, 2010 It's worth a geo check just to be safe. Nah doesn't need that rubbish, just take it down the local tyre place to get it 'tracked'!! Quote Link to comment Share on other sites More sharing options...
SMARTLY Posted November 24, 2010 Author Report Share Posted November 24, 2010 OK, here's a picture of a used ZV5 ( not mine ): Starting from the right of the picture, mine is fine on the far right and through the three main grooves. Then the cross-thread on the left is where mine is worn significantly but only on the off-side front. As suggested above I'll get a tracking check done and see if it's the toe that's out on that side. Quote Link to comment Share on other sites More sharing options...
Tony Posted November 24, 2010 Report Share Posted November 24, 2010 Seems an odd place to wear , maybe just keep an eye on it for a while. Quote Link to comment Share on other sites More sharing options...
SMARTLY Posted November 24, 2010 Author Report Share Posted November 24, 2010 What was bothering me was that only the one tyre on the front had worn like that, so does that indicate toe incorrect on the one side? Quote Link to comment Share on other sites More sharing options...
Rich Posted November 24, 2010 Report Share Posted November 24, 2010 Have you changed the tyres since you bought the car? Was it already like that? Quote Link to comment Share on other sites More sharing options...
Tony Posted November 24, 2010 Report Share Posted November 24, 2010 What was bothering me was that only the one tyre on the front had worn like that, so does that indicate toe incorrect on the one side? No because toe is a shared angle. Quote Link to comment Share on other sites More sharing options...
Rich Posted November 24, 2010 Report Share Posted November 24, 2010 What was bothering me was that only the one tyre on the front had worn like that, so does that indicate toe incorrect on the one side? No because toe is a shared angle. Both toe angles will be incorrect but the wear will only show on one tyre as that side is out of tolerance? Quote Link to comment Share on other sites More sharing options...
SMARTLY Posted November 24, 2010 Author Report Share Posted November 24, 2010 Tyres were new on front when I bought it, so this is the first time I knew of this wear, done about 8k miles. So what can I do / get done to stop the wear on one side? Quote Link to comment Share on other sites More sharing options...
Rich Posted November 24, 2010 Report Share Posted November 24, 2010 A Geometry Quote Link to comment Share on other sites More sharing options...
SMARTLY Posted November 24, 2010 Author Report Share Posted November 24, 2010 But somebody said no above. Quote Link to comment Share on other sites More sharing options...
Tony Posted November 24, 2010 Report Share Posted November 24, 2010 Geo will effect the entire tread or an edge but not single out a particular bar. Quote Link to comment Share on other sites More sharing options...
Rich Posted November 24, 2010 Report Share Posted November 24, 2010 But somebody said no above. Yeah that was me but I was joking hence the whistle! How long have you been on this forum now, you should know we only talk geo Quote Link to comment Share on other sites More sharing options...
SMARTLY Posted November 24, 2010 Author Report Share Posted November 24, 2010 OK, then but it's not just one bar Tony it's the inner edge ( in photo above it's the left side about a third i.e. everything to the left of the left most groove ). Have I explained myself well? I know it's geometry, but it's geometry as opposed to tracking I need? Quote Link to comment Share on other sites More sharing options...
Rich Posted November 24, 2010 Report Share Posted November 24, 2010 It might help if you took a photo of the actual tyre so we can see the wear. It is always a geometry you will need, tracking is no good as it only deals with the front. They won't be aligning the wheels to anything cos you need to measure the rears first, then set those if they need doing and then the front. Maybe take it to one of the trusted garages that are part of the WIM network? Quote Link to comment Share on other sites More sharing options...
SMARTLY Posted November 25, 2010 Author Report Share Posted November 25, 2010 Unfortunately nearest WIM garage is miles away. I'll try and get a photo of both fronts to show the wear, it's a bit cold out this morning and car is nice and snug in the garage. Watch this space. Quote Link to comment Share on other sites More sharing options...
Tony Posted November 25, 2010 Report Share Posted November 25, 2010 What concerns me is the toe angle is shared so what one tyre has so does the other. The camber angle is fixed and on the 250 known to be correct this time, not like the 200. The castor angle is also fixed and again proved to work correct on the 250. The only time i see issues on the 250 is when they are lowered. Quote Link to comment Share on other sites More sharing options...
Rich Posted November 25, 2010 Report Share Posted November 25, 2010 Tony he has a Ford Focus now not a lexus, see sig!! Quote Link to comment Share on other sites More sharing options...
Tony Posted November 25, 2010 Report Share Posted November 25, 2010 Tony he has a Ford Focus now not a lexus, see sig!! The Focus geo is even more proven. I think we need to see an image of the actual tyre, like you say. It might be a defect in the compound. Quote Link to comment Share on other sites More sharing options...
Rich Posted November 25, 2010 Report Share Posted November 25, 2010 I'm not getting this shared toe thing...on mine there is a steering rod each side with a rod end on each, which can be independently adjusted. I thought it was possible for one side to be out while the other is still ok, which would cause the wear? Quote Link to comment Share on other sites More sharing options...
Tony Posted November 25, 2010 Report Share Posted November 25, 2010 Lets say you just hit a kerb and knocked the toe in 10mm, as soon as you drive forward the wheels will self center because they are linked by the steering rack, so now each wheel has 5mm of toe and as a consequence the dead ahead steering wheel position is now off line. It's the same thing as fast-fit correcting the tow without knowing the thrust. Quote Link to comment Share on other sites More sharing options...
Rich Posted November 25, 2010 Report Share Posted November 25, 2010 Lets say you just hit a kerb and knocked the toe in 10mm, as soon as you drive forward the wheels will self center because they are linked by the steering rack, so now each wheel has 5mm of toe and as a consequence the dead ahead steering wheel position is now off line. It's the same thing as fast-fit correcting the tow without knowing the thrust. Gotcha! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.