Ellz Posted October 5, 2008 Author Report Share Posted October 5, 2008 Well a few little updates. Tony your gonna have fun with the geo on this. We got given some free TRD supra wide arch fenders so will probably be chopping these up and putting these on so then i can cut the metal arch so i can get the car lower, but im guessing there will be a limit i can go to without recovering the geo side of things ?? Is that right Tony ? As you can see they stick out a little LoL Fronts Rears Fronts are also going to have spacers on not much about 5 - 10mm gonna need those 2 inch wide arches We're also in the process of doing 2 other cars, both nissans one with a CA18 anohter with a SR20 seen here mocked up with intake and fuel rail, just after giving it a clean. This engine will be going in a R32 skyline, most of the S13 stuff just bolts striaght across which is saving lots of time. Also painted the engine bay white went from this first coat of primer To this, after 4 coats of primer and 3 top gloss white and lots of boring rubbing down in between Just waiting on some engine mounts (bit that bolts to the block) and some parts from the US Quote Link to comment Share on other sites More sharing options...
Tony Posted October 5, 2008 Report Share Posted October 5, 2008 Looks good.... very good.. With the wheels, spacers, lowering, track you have already duffed up the oem adjusters.... I hope you intend to install some aftermarket kits so i can calibrate the chassis unhindered. Quote Link to comment Share on other sites More sharing options...
Ellz Posted October 6, 2008 Author Report Share Posted October 6, 2008 Looks good.... very good.. With the wheels, spacers, lowering, track you have already duffed up the oem adjusters.... I hope you intend to install some aftermarket kits so i can calibrate the chassis unhindered. I was thinking i might need to but are there any apart from the TDi bit and prolex's new one ? Might have to make a few bits our self. Quote Link to comment Share on other sites More sharing options...
Mat Posted October 6, 2008 Report Share Posted October 6, 2008 whats wrong with the TDI bit, and which prolex bit Quote Link to comment Share on other sites More sharing options...
Sparkystav Posted October 6, 2008 Report Share Posted October 6, 2008 I think its about Cost Mat, and Prolex are offering a similar style extended arms. Quote Link to comment Share on other sites More sharing options...
Prolex-UK Posted October 6, 2008 Report Share Posted October 6, 2008 whats wrong with the TDI bit, and which prolex bit do the rear adjustable lower control arms as well Mine are on the shelf ready to ship BTW Quote Link to comment Share on other sites More sharing options...
Ellz Posted October 6, 2008 Author Report Share Posted October 6, 2008 whats wrong with the TDI bit, and which prolex bit do the rear adjustable lower control arms as well Mine are on the shelf ready to ship BTW Dave could you send me a super doooooper price for both via pm please. Matt Stavs right price is a big issue with the TDi piece, i know they probably put alot of time into it but at the end of the day all it is, is a hex bar with a couple of rose joints on each end and £325 + vat is half a turbo from my eyes Quote Link to comment Share on other sites More sharing options...
scorps Posted July 13, 2010 Report Share Posted July 13, 2010 Any updates on this project? Quote Link to comment Share on other sites More sharing options...
wahid is200 Posted September 26, 2011 Report Share Posted September 26, 2011 Any updates Quote Link to comment Share on other sites More sharing options...
adam_r Posted September 27, 2011 Report Share Posted September 27, 2011 Any updates it was 3 years ago this thread slowed to a halt... Quote Link to comment Share on other sites More sharing options...
Tony Posted September 27, 2011 Report Share Posted September 27, 2011 I've not read or heard any more about this car since the last post Quote Link to comment Share on other sites More sharing options...
Sparkystav Posted September 27, 2011 Report Share Posted September 27, 2011 he's packed it in, sold all the bits, though he still have the 1jz block for sale, think its on driftworks. Quote Link to comment Share on other sites More sharing options...
Tony Posted September 27, 2011 Report Share Posted September 27, 2011 That's a shame, wonder what happened there? Quote Link to comment Share on other sites More sharing options...
wahid is200 Posted September 27, 2011 Report Share Posted September 27, 2011 That's a shame mate Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.