Tony Posted December 1, 2012 Report Share Posted December 1, 2012 Studs that rotate in the washer that allows you to fit wheels with incorrect hole positions? Quote Link to comment Share on other sites More sharing options...
Waz Posted January 16, 2013 Report Share Posted January 16, 2013 I think you could trust them to seem ok when new, then jam up after some serious miles rendering your wheels stuck on the car, requiring violence to remove! Assuming that it didn't create an oval wheel sensation! imagine an inexperienced boy racer combining this feature with wheels that had too large a bore for the car - lining that up even long enough to fit the wheels, let alone driving over average road bumps... I can imagine 'Construction and Use' regulations used as a non-insurance valid claim / dangerous vehicle charge in an accident. Quote Link to comment Share on other sites More sharing options...
Freaky Roadster Posted January 18, 2013 Report Share Posted January 18, 2013 I would say in an absolute emergency only. Quote Link to comment Share on other sites More sharing options...
adam_r Posted January 19, 2013 Report Share Posted January 19, 2013 they look as safe as a non hub centric 20mm spacer & using bolts that have an incorrect taper Quote Link to comment Share on other sites More sharing options...
Tony Posted January 19, 2013 Author Report Share Posted January 19, 2013 Forced fit studs..... Nothing but an accident waiting to happen. Quote Link to comment Share on other sites More sharing options...
Viking Posted January 26, 2013 Report Share Posted January 26, 2013 Also known as "wobble bolts" I think? Quote Link to comment Share on other sites More sharing options...
SMARTLY Posted January 26, 2013 Report Share Posted January 26, 2013 I had something like that made up on a heavily modded Ford I used to own, it needed more throw on the clutch so the bolt through the clutch pedal was cut and welded back offset. Quote Link to comment Share on other sites More sharing options...
Tony Posted January 26, 2013 Author Report Share Posted January 26, 2013 Did it work...... Quote Link to comment Share on other sites More sharing options...
SMARTLY Posted January 26, 2013 Report Share Posted January 26, 2013 Yes, it most certainly did. Quote Link to comment Share on other sites More sharing options...
TheBoy Posted January 28, 2013 Report Share Posted January 28, 2013 I don't like them, and can never recommend them on our site. Is it really hard to get wheels with the right PCD? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.