zetecdan Posted September 15, 2009 Report Share Posted September 15, 2009 tony i have modified an aftermarket steering wheel and hub kit to fit to my car but the steering wheel slightly off of straight (very slightly off but just annoys me) when the wheels are pointing straight. is it possible to adjust this out with the tracking and not upsetting the geometry etc? Quote Link to comment Share on other sites More sharing options...
Tony Posted September 15, 2009 Report Share Posted September 15, 2009 Yep the Alignment is all you need providing it's four wheel. Quote Link to comment Share on other sites More sharing options...
dazz33 Posted September 15, 2009 Report Share Posted September 15, 2009 sorry to hijack the thread Tony ive sent you PM.. Quote Link to comment Share on other sites More sharing options...
zetecdan Posted September 15, 2009 Author Report Share Posted September 15, 2009 Yep the Alignment is all you need providing it's four wheel. thanks for the reply i may have to pop along when i am at my wits end with it lol Quote Link to comment Share on other sites More sharing options...
Rich Posted September 16, 2009 Report Share Posted September 16, 2009 Yep the Alignment is all you need providing it's four wheel. As Dan has no handling issues 4 wheel alignment will be ok as you can assume the rear is set correct, but he also has the camber/caster kit fitted. Wouldn't it be better to do a geometry to check these angles don't change when the toe is adjusted? Dan, I take it the camber kit is still working ok on yours, handling and tyre wear both fine? Quote Link to comment Share on other sites More sharing options...
zetecdan Posted September 16, 2009 Author Report Share Posted September 16, 2009 Yep the Alignment is all you need providing it's four wheel. As Dan has no handling issues 4 wheel alignment will be ok as you can assume the rear is set correct, but he also has the camber/caster kit fitted. Wouldn't it be better to do a geometry to check these angles don't change when the toe is adjusted? Dan, I take it the camber kit is still working ok on yours, handling and tyre wear both fine? yeah got no issues, tyre wear is ok and no steering issues. Quote Link to comment Share on other sites More sharing options...
Tony Posted September 16, 2009 Report Share Posted September 16, 2009 Yep the Alignment is all you need providing it's four wheel. As Dan has no handling issues 4 wheel alignment will be ok as you can assume the rear is set correct, but he also has the camber/caster kit fitted. Wouldn't it be better to do a geometry to check these angles don't change when the toe is adjusted? Dan, I take it the camber kit is still working ok on yours, handling and tyre wear both fine? Since the full chassis has been measured in the past and deemed ok the small correction for the steering won't mess with the rest. Quote Link to comment Share on other sites More sharing options...
Rich Posted September 16, 2009 Report Share Posted September 16, 2009 That's good to know, thought it would. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.