Jump to content

SMARTLY

Gold Member
  • Posts

    9,347
  • Joined

  • Last visited

  • Days Won

    100

Posts posted by SMARTLY

  1. That will give about an 18 inch lift. In the ebay listing though it says

    We sell these for £56.00 when available
    , so what does that mean?

     

    The 2 ton jacks tend to lift 12 inches. But you can get these for about £30.

     

    At the end of the day it depends what you want to do, I'd be inclined to go with jack and ramps but that's because I've never used axle stands. Presumably you can use axle stands at the front.

     

    So the question is what height do you want to leave the car above the ground and are you going to use a creeper?

  2. Those caravan ones are only 14 cm high, that's less than 6 inches. What about getting some car ramps and jacking the car one side at a time to get them underneath? I remember doing something like that with my Mk1 Jaguar, I drove the rear wheels onto bricks then jacked it up on a brick and slid the ramps underneath.

     

    Screwfix have some that are 8.5 inches wide.

     

    Or try these on ebay for £42 at the moment, adjustable height and 245 tyre width item no. 130335114064, probably owrth nearly £200 !!

  3. I've still got a set in the roof of my garage, haven't used them for years. But they are wide enough for modern day tyres and very stable. You just have to be 100% sure you are lined up and go up it steady but not too slow as they will move. If you can put them against something or hold them with something then so much the better. make sure you have somebody to guide you and say stop .... there is a stop bar but if you keep driving :D

  4. Dazz I don't mind going to have a quick look at it for you, if it's Telford it's only 30 miles away from me. I don't know anything about them but can give you an opinion on how it looks and sounds. I've bought a few cars in my time ( nearly 40 cars now ) so I know the basics.

     

    I'm not working at present, so I could go day time or evening.

     

    PM if you are interested.

×
×
  • Create New...