Brett

Yep totally agree the lings site is ok but the prices and p&p are hideous.HH is the way to go for great prices guys.

I was a normal member then and not a mod for the club but still remember As i recall it was one of our 1st meets and a great one as well.Dam have i been there that long

No probs Tony i will see the response for a meet next summer.Im sure we had a meet at WIM on the old forum THAOC

This might be an option Tony but i would say the springs would compress again unless i went for a harder spring. I think Honda springs are quite soft as this also happened to my old 7th gen but with no inside tyre wear. I spoke to Honda about this as a warrenty claim but in most cases they would see this as wear and tear. Not that good imo for a car with only 30k on. If i get the new cambers i will keep you updated on this.

Very true Tony but my faults are the springs are slightly compressed due to towing. The wife and myself get away about every 3 weeks in the van with an average of 100 miles.I also installed Grays spring assister's to see if this helped.

Hi guys im thinking of putting up a thread on Type Accord for an Alignment meet at WIM. What do you guys think if i can get lots of intereset from TA forum. Cheers Brett

I had a chat with Faz from Type Accord and he has been running J power cambers for 2 years and recomened them. Also Tony to add to this thread the wear on my tyres might also be due to me towing a caravan this i forgot to say. When the van is on the rear of the car will drop a little with the weight of the caravan but withing the limits of hondas nose weight. I had a chat with Steve from Holdcroft and he said if the camber is already slightly out with the caravan hooked on this will cause more - camber hence more wear on the inside tyres. He also said when i get the new cambers fitted have the camber set to the upper limits but still in spec.This in affect i think would then keep the car in the lower limits but still in spec with the caravan on.

Ok guys just an update iv emailed the seller to see if these are compactabel with my car. Im thinking changing the full lot to get my car spot on http://www.ebay.co.uk/itm/180938645133?_trksid=p5197.c0.m619

Ok thanks Tony im sure there differant but will check.

Thank you Tony for a quick response. The link for the arms say there for a 7th gen. Will these also fit my car that is a 2010 saloon

Hi guys new member hear with a problem.Ok as the title says i have rear inner tyre wear on my car. I have had a Hunter wheel alignment and the only thing that is out of spec is the rear camber. I was told only the toe would cause inner tyre wear but this is not the case. Im ridding on upgraded OEM 18" wheels at the min and the car is not lowered. Any info guys on this would be apreciated.Hear is the results of my Aliginment.Also since this Alignment was done the inner wear hasent inproved.