[altering camber]

It will move toward positive or top of the wheel out.

 

many thanks for that Tony.

[altering camber]

Mercedes W210 front camber:

 

Will putting in fatter rubber spring spacers (increasing height of vehicle) alter the camber and if so in which direction ?

 

TIA

Mark

[Issues with Mercedes 320Cdi Estate]

Tony,

 

Many thanks for your help in this matter, it's be much appreciated.

 

Mark

[Issues with Mercedes 320Cdi Estate]

Thanks for that

 

Forgot to say in original post; have original spec 18" AMG staggered wheels with 235/40 and 265/35 tyres

 

Should I request that they setup against the specs for an Avantgarde model with Level Control, with the changes I have done ? or are the specs the same as an Elegance model

 

Mark

[Issues with Mercedes 320Cdi Estate]

NSF: 340mm

OSF: 337mm

NSR: 350mm

OSR: 345mm

[Issues with Mercedes 320Cdi Estate]

Thanks for your prompt response, I'll get a new arm

 

What I am a little confused about is that the NSR wheel looks more vertical that the OSR but has a higher negative camber

 

Mark

[Issues with Mercedes 320Cdi Estate]

Hi,

 

Newby question/issues.

 

Just had my car put on a hunter system and got the following results:

 

 

 

The car is a 2000 Merc E320Cdi Elegance Estate, with Avantgarde springs all round and shock s on the front. Self levelling on the back.

 

I can accept the front reading, as it needs adjustable camber bolts fitting

 

What I can't understand is the rear left reading, as the wheel visually was more vertical than the right one. This was confirmed by two of the guys at the centre.

 

What spec of vehicle should be put into the hunter system ?

 

Any help and advice would be most welcome.