proser

many thanks for that Tony.

Mercedes W210 front camber: Will putting in fatter rubber spring spacers (increasing height of vehicle) alter the camber and if so in which direction ? TIA Mark

Tony, Many thanks for your help in this matter, it's be much appreciated. Mark

Thanks for that Forgot to say in original post; have original spec 18" AMG staggered wheels with 235/40 and 265/35 tyres Should I request that they setup against the specs for an Avantgarde model with Level Control, with the changes I have done ? or are the specs the same as an Elegance model Mark

NSF: 340mm OSF: 337mm NSR: 350mm OSR: 345mm

Thanks for your prompt response, I'll get a new arm What I am a little confused about is that the NSR wheel looks more vertical that the OSR but has a higher negative camber Mark

Hi, Newby question/issues. Just had my car put on a hunter system and got the following results: The car is a 2000 Merc E320Cdi Elegance Estate, with Avantgarde springs all round and shock s on the front. Self levelling on the back. I can accept the front reading, as it needs adjustable camber bolts fitting What I can't understand is the rear left reading, as the wheel visually was more vertical than the right one. This was confirmed by two of the guys at the centre. What spec of vehicle should be put into the hunter system ? Any help and advice would be most welcome.