Hi,
I have owned a GS300 since new in 2006, and driven 15000 miles mostly long distance trips on M'ways and A roads. At its annual service Lexus Twickenham advised me of excessive wear on the inside of the front tryes. They suspected that the front wheels were out of alignment due to some road bump or mounting a pavement. I left for France the next day so I had the wheel geometry checked by a Lexus agent on arrival at my destination. By this time the tyres were badly worn and I had the dealer fit new Michelin Primacy tyres on the rear, moving the original Dunlop Sports to the front.
To my surpise the wheel testing showed more or lest perfect alignment, but negative camber on the front wheels both of which were outside Lexus's tolerance. They have adjusted the camber to -21' (left front) and -37' (right front), leaving all all other readings more or less unchanged.
I noticed from the Lexus Owners Forum that tyre wear problems were not unusual with the IS model, and it was even suggetsed that Lexus had historically appled incorrect settings, but I found nothing specific about the GS. One correspondent suggested that I contact you, saying that Tony from WIM was THE expert on all such matters! So here I am!
My questions are:
1) Is it likely that the negative camber on my GS was incrrectly set when I bought the vehicle in 2006, or it is plausible that somehow I have knocked both front wheels out? (There's no sign of damage to any of the wheel rims).
2) Are the new settings going to resolve the problem and give me decent mileage from my tyres (I am over 65 and my driving style is consistent with my age!). I am used to getting 30k plus from a decent set of tyres.
3) Is this likely to be a recurring problem and should I get the geometry checked on a regular basis?
4) Any views on Michelin v Dunlop? On previous cars (Ford, Peugeot, Citroen) I have always been very satisfied with Michelin, despite the premium paid on purchase.
Thanks in advance for any advice.
Gwilym.