andyelcomb Posted February 25, 2021 Report Share Posted February 25, 2021 Twas a bit windy on Tuesday chez Andy, but a nice sunny day so a good day to put out some washing..... or not... Quote Link to comment Share on other sites More sharing options...
Tony Posted February 25, 2021 Report Share Posted February 25, 2021 You could call it a fetcher pond Quote Link to comment Share on other sites More sharing options...
Rich Posted February 25, 2021 Report Share Posted February 25, 2021 What a pain but I hope you saw the funny side eventually! Quote Link to comment Share on other sites More sharing options...
andyelcomb Posted February 27, 2021 Author Report Share Posted February 27, 2021 On 25/02/2021 at 21:54, Rich said: What a pain but I hope you saw the funny side eventually! Absolutely. First glance it was "ah crap!" but then I just started laughing. Showed it to SWMBO who fortunately also found it funny. If you look closer you'll see that it has failed at a previous welded repair - unfortunately I couldn't find a decent piece of steel to stuff inside the tube and typically it failed next to the weld where the metal was fatigued. I now have a much thicker tubed Brabantia rotary in place. The only problem with that is that the short-arse SWMBO struggles to reach the outer lines! Quote Link to comment Share on other sites More sharing options...
adam_r Posted February 27, 2021 Report Share Posted February 27, 2021 It needed another wash that's all . Quote Link to comment Share on other sites More sharing options...
Tony Posted February 28, 2021 Report Share Posted February 28, 2021 I think it took it's own life.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.