Jump to content

what can be adjusted on a 300zx?


adam_r
 Share

Recommended Posts

Hey guys. One of my friends has a 300zx TT SWB.. he has just fitted some nice coilovers and some camber adjusters to the car and wants it aligned / geo'd properly.

 

What can be adjusted on these cars ? And what information would we have to supply to get the necessary information sent to your associate garage in denmead (near Portsmouth)

 

... he's after a fast road setup and basically wants as Much grip as the tyres and chassis will offer.

Link to comment
Share on other sites

Front and rear toe and rear camber from OEM. They usually need aftermarket rear toe & front and rear camber adjustable arms, if they're lowered more than ~30mm, as the OEM adjusters have a small range. Similar front set-up to Skyline, rear similar to 200SX.

 

I'd want to see adjustable rear toe and camber arms, front camber arms and tension-rods (castor) as a minimum, if it's on coilovers.

Link to comment
Share on other sites

Hmm ok so reading in to this.. it's going to need a few more bits really.

So:

Anti bump steer

Roll center adjusters

Rear toe arms

Rear camber arms

And front castor

(He has front camber adjusters)

 

Whilst the parts above are ideal.. can the car be set up for the meantime until he gets the above bits? Or is a simple alignment the only thing he can do?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...