Jump to content

discount tyres dan

Basic Member
  • Posts

    872
  • Joined

  • Last visited

Everything posted by discount tyres dan

  1. the guy i right about the track rod end, the only time they should be heated up is when removing them to fit new ones, heating can damage the rubber gaiters and lead to the grease inside boiling resulting in excsive wear due to increased friction, it is also failable on an m.o.t if the tester spots that the t.r.e has been heated. as for the geometry basicly the rear toe has to be adjusted before the front toe, so you set both rear toes as they should be, this will give you a thrust line of '0' meaning that the center line of the total rear toe is exactly down the centre of the car. the steeri wheel is then clamped in the straight ahead position and the front toe on both sides is adjusted to give the ideal toe on both wheels, this will automaticly leave the 'steer ahead' at '0', if olny one front toe is adjusted then either the front total toe is incorrect or the stering wheel will be off centre, what needs to happen is the seized track rod end needs to either be free'd off safely or replaced and the geometry re-checked and adjusted, i cant believe they didnt check them before starting to avoid wasting everyones time and your money.
  2. or fill the boot with heavy things until it has dropped 50-60mm
  3. im looking to add spacers to my car too, but only the rear to give it that 'fat look' im after 10mm hubcentric spacers with longer wheel bolts.. thnk i can find any..? ... no
  4. with the mondeo's i tap a steep angled chissle into the slot where the pinch bolt is to open it up a bit then lever down on the lower arm with a long bar!
  5. i deleted all my cookies (yum yum burp) but still had to log in... i may have to sue (sew? soo? soe?) for wear and tear to my laptop keys. some times i just cat see what im typrmf nsdmm sm!
  6. i think he will be saying 'bye' had to stay behind to 'have a chat' with clive. the customer took it realy well, he was given an audi a4 estate as a loaner untill his car is repaired.
  7. we had a good one today.. clive wouldnt allow me to photograph it though bmw 535 1999 .. still not impressed? ok it was de-badged so the staff member (new bloke) had to open the bonnet to see if it was 4, 6 or 8 cylinders.. still nothing went wrong, the car was geom'd and all the measurments were ok, so the customer paid and went on his way.. he came back 5 mins laer with a very bent car.. new bloke didnt shut the bonnet properly and it flew up at about 80 mph.. you can see a mark on the roof where the badge has hit it!! at a first glance it needs the roof repaired (ppossibly new skin) new bonnet, new screen, repair or replace 2 front wings, bonnet hinges, any trim and drivers underwear. a right mess
  8. yey.. old allegro's (all agro's) used to pop out back windows when the back was jacked up on one side only
  9. i never park with my front wheel on lock! it can cause damage, someone i know parked on full lock and a dust car hit the pokey out wheel... loads of damage
  10. just like us. our haweka ballencing system is amazing.
  11. i would get a second opinion on the ballencing.. most places dont charge for checking the ballence of the wheels, get the fitter to check to see if the tyres and wheel are running true. maybe the original place had a a slightly off callibrated ballencer.. it happens. its also free to check this so what have yougot to loose?
  12. im running 225/40x18's on alloys on the car.. my spare is a 195/65x15.. on a steel rim. i used it once too.... how hardcore am i?
  13. thats about 10mm height difference between the two wheels, i would treat your spare exactly as you would a space saver as the height difference will cause two different handeling charecteristics (sp?) on the same axle. use it as a 'get you to a garage' type wheel
  14. bridgestones? there are so many different bridgestones all of the same size and the markings are so small you need to know where they are to find them, you could go to a tyre dealer and buy a bridgstone re040 and still get the wrong tyre, the compound is reconised by a small group of letters az,cz etc. the start compound is set for particular makes and models, lexus, nissan. continental do it too for example mercedes use the symbol 'mo' michelin use the g1 for porsche
  15. i did i did i did! nothing major but it is to me.. chrystal clear indicators, side repeaters and projector headlights.. well i say i got them i got the small lights but i have been given the money to buy the headlights coz they are coming from australia.. nearest place that does right hand drive projector lights for a w202 merc
  16. does that mean we can add pictures without using a seperate picture host web-site thing?
  17. most bmw's need waiting to get the car at the right level to adjust, the weights we use weigh four stone each (56lb) and to get the car right we need 3 in each front footwell, 1 in each rear footwell, 1 inbetween to rear seats (on he transmittion tunnel) and one in the boot, thats a total of 40 stone or 560lb,
  18. do the £6 russian job too, but i go for the £12 inside and out jobby, wash, dry, hover, windows, dash. then back to my gaff for a good going over with the good old maxwax, armour all the black bits (including tyre walls) job done! i maxwax the outside of the windows too, then im scared to use it because its black
  19. if only i had a camera we had 2 great cars in today, both for tyres, both had to be ordered in specialy, the first was for an aston martin lagonda the second was an absolutly mint 1968 ford gt40. i nearly wet myself
  20. we have an astra (1990) as a company run about, i bumped it down a kurb yesterday and heard the drop link snap.. knew what it was straight away and the car behaved no differently.
  21. i knew him since i was 2, everyone in hemel either knows him or knows someone who does, wednesday will be a sad day indeed!
×
×
  • Create New...