joeB12

All done mate, see you Thursday night!

If we could have the car here at the end of the day on Thursday the 11th, I could get started with it early Friday morning, that way you'd be able to collect it at the end of the day on Saturday if all goes well!

It's not just price, doing the job the same day just isn't something we'd consider. I understand the logistics of it are an issue, it's just not a job we'd be willing to rush! Time to tailor the ride height/pre load, test drive and any other variables like seized bolts etc all adds up!

Rich is right, the alignment can be adjusted perfectly, but if the technicians idea of the steering wheel being level is different from yours, then it'll still seem as if it is off. When it goes back for its re-check, I'd suggest you personally checking that the steering wheel is at the position you'd like it to be, as how he perceives dead straight may be different to how you do. As for the tyre wear, if I'm right with what's been said above, there shouldn't be any, the problem is purely cosmetic. The vehicle is aligned correctly, just not to the steering position!!

I'm on it Tony, I'll have a measure up on Wednesday and we can go from there!

If it's too low at the moment raising it 15mm or so is the first port of call, while in there it's pretty straight forward to re-check the spring pre-load is all where it needs to be! Thursday morning shall tell!

I had my suspicions, a boy can dream though.

Here's a slightly more practical use for the technology https://www.youtube.com/watch?v=-P6MMVjfapA

Off the top of my head I think the S3 runs a Mac strut at the front,

Give me a shout when you'd like to bring it in Steve and we'll get it sorted

The left SAI (steering axis inclination) or KPI (king pin inclination) as it's noted on your printout, is sitting quite a lot lower than the off-side. These figures can move higher or lower within reason, as long as they move together. These values haven't, which has shown through in the caster angle. I imagine there's a slight bend in one of the lower suspension components on the nearside, and rectifying that will bring your SAI values even, in turn, bringing your caster angles in line with one another. At a guess I'd say nearside front lower arm and ball joint are to blame. but there's an outside chance its the hub itself, there's a chance it's the subframe, there's even a chance the chap measuring the car knocked one of the gauges! Proof is in the pudding, if its something you'd want fixing, the most logical and cheapest place to start is the nearside front lower arm. I'd like to measure it before any of this goes ahead though, evening out the front cambers will give a more definitive reading and just incase it was a spoof measurement. Don't want to be changing parts unnecessarily,

Tony, check out that front SAI reading, seems to fit in with the caster difference.

From a legal point of view, you can. However it's not advisable. Run-Flats require a specific geometry setup that differs quite a lot from the factory specification. Applying run-flat settings to one end of the car and standard to the other is a big no-no, and leaving the alignment as it is when the tyres are changed is asking for tyre wear issues. On top of all that the ride quality given from having both RFTs and standard tyres will be pants!

They are yeah. From the conversation I had with her it seems like only 10 or less sizes are being discontinued. I imagine the tyre is too popular and too good to take off the market altogether

Ok, just spoke to Vredestein direct. They're not discontinuing the sessanta completely, just a handful of some of the more unpopular sizes, unfortunately the 245/40/19 is one of them! I made inquiries with them as to laying my hands on one of the last sets, but they've already gone! Time to try the Michelin Super Sports maybe?

If they are it's the first we've heard of it! What size's are you running on there mate? I'll check and confirm?

I haven't had any first hand experience with any of those, so can't comment! MX5 parts have a pretty decent range of rear silencers, so that might be an option? Other than that I'm sure the guys on the OC will have many recommendations!

Milltek have an application for the NC, it is, in my eyes, the best aftermarket sports exhaust for the MK3. Its looks, sound and build quality are incredible, that is reflected in the price though. For the "cat back" system supplied and fitted it's around £790inc. The rear silencer and tailpipes on their own come in at just under £500. Here's a video of a before and after

Yeah, 3 way adjustable. I'll send you over a PM Steve

We've done quite a few H&R roll bar kits on the 5's, they're one of the more expensive kits, but I've only ever had excellent feed back about them

22 degrees and clear so far, fingers crossed! May have to crack out my steel toe cap flip-flops

Every little helps! We keep a few adjuster bolts in stock should the worst happen!

Yeah no problem Iian. I'm sure we'll have more than enough time to check it out! On a side note, if anyone has a camera they'd like to bring along for some pictures for the forums I'd be very grateful! Fingers crossed for some good weather! Joe

No problem, bookings are shaping up a lot like this - 9:00 - David (NC) Mx5 oc 10:00 - Tony (NB) mx5 oc 11:00 - Dave (NA) Mazda Menders 12:00 - (NB) Mx5 nuts 1:00 - Amy (NA) Roadster soc. 2:00 - Oliver (NC) Mx5 nuts 3:00 - Matt (NA) Roadster soc. I'm also taking sub-bookings for if there are any free spaces on the day Cheers Joe

Just had a chat with one of our account customers who deals with inflatables, bouncy castles etc. It seems I may have arranged a few bits for the day Something to keep the any kids/big kids entertained!