Jump to content

Busy time


liner33
 Share

Recommended Posts

All three cars done since yesterday afternoon

 

Wifes Prius all done , coasted with Sonax BSD over the wax 

 

20150513_122605_zpsuoojli2b.jpg

 

My Octy done with Reload over the Cquartz

20150513_122618_zpsbmycsfnb.jpg

 

and the 370 all ready for Japfest with BSD over wax again

 

20150513_122636_zpskjeq8r5h.jpg

Link to comment
Share on other sites

You've done a good job :D

 

What's your technique when washing in the sun to avoid the water drying on? I mainly used ONR until I moved to the house so didn't have this problem but now I use the pressure washer and the shampoo has dried before I've finished rinsing it off.

Link to comment
Share on other sites

That's the problem I have with the Accord! I've used Time to Dry in the past which works well but it was for this reason I switched to ONR so I don't have to QD the car afterwards.

 

Maybe I should just use the hose/pressure washer to get the dirt off if it's bad and go back to ONR so I can dry as I wash.

 

How does your filtered water work, what's the setup?

Link to comment
Share on other sites

http://www.daqua.co.uk/divessels.htm

 

I have one of these , the blue one , and its connected in between the tap and the pressure washer , i use it all the time and need to change the resin once a year , others use it just for rinsing

 

Also use the water for the iron and it only needs descaling once a year , our water is very hard here

Link to comment
Share on other sites

That looks good and not as expensive as I thought it would be. What's the difference between the blue one and the black one underneath? Would the cheaper one be ok for using with a pressure washer?

 

Can you drink the water filtered with this? We have a water jug that we use for cold drinks and the kettle but it doesn't get rid of all the limescale.

Link to comment
Share on other sites

That looks good and not as expensive as I thought it would be. What's the difference between the blue one and the black one underneath? Would the cheaper one be ok for using with a pressure washer?

 

Can you drink the water filtered with this? We have a water jug that we use for cold drinks and the kettle but it doesn't get rid of all the limescale.

The black cheaper one is unfilled so you need to buy resin on top , £70 a bag which does three fills

 

I wouldnt want to drink it , if its left in the cylinder it smells fishy when first used so you need to run a fair bit of water through to clear that smell , but its still ok to wash the car with it

 

Dont think it has a shelf life as i dont use it much over winter , but we are back to the fishy smell for a minute or two when first using it

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...